Photos, videos and docs of HaarFager, with the keywords: "Dodges"

Truck Lights

nobody@ipernity.com (HaarFager) — Sat, 21 May 2022 20:44:42 +0000

A pickup truck going past my house one night.

Camera: Kalimar KX 7000 (Minolta X-300s/X-370n clone)
Lens: Vivitar MC 28mm, f/2.8
Film: Kodak Colorplus 200 (expired 05/2013)
Aperture: f/2.8
Shutter Speed: 1/8 of a second
Date: October 6th, 2020, 11.54 p.m.
Location: Norris City, Illinois, U.S.A.

Developing Chemicals: Unicolor C-41
Water pre-soak: 1 minute at 102 degrees
Developer: 3 mins. and 30 secs. at 102 degrees
Water rinse: 2 minutes (to keep chemicals clean)
Blix: 6 ½ minutes at 102 degrees
Water rinse: 2 minutes at approx. 100 degrees
Stabilizer: 1 minute at room temperature
Water rinse: 2 minutes
Kodak Photo-Flo 200: 1 minute

KX 7000 Kodak Colorplus 200 Fountains 2020 13hff

Magnum

nobody@ipernity.com (HaarFager) — Sat, 15 Jan 2022 17:11:52 +0000

HaarFager has posted:

My Uncle’s Dodge Magnum when he got it brand new in 1978. Photographed at our local park when the family got together for a picnic on the Fourth of July.

Camera: Konica Autoreflex TC
Lens: Hexanon AR 50mm, f/1.7
Film: Kodak Tri-X 400 ASA
Date: July 4th, 1978
Location: Norris City, Illinois, U.S.A.

Konica Autoreflex TC Kodak Tri-X July 1978 19ff

1976 Dodge Camper Truck

nobody@ipernity.com (HaarFager) — Wed, 31 Oct 2018 17:34:17 +0000

HaarFager has posted:

This was an old Dodge pickup I had back in the 1990s.

1962 Dodge Dart Station Wagon

nobody@ipernity.com (HaarFager) — Wed, 16 Sep 2015 09:04:59 +0000

HaarFager has posted:

I saw this 1962 Dodge Dart station wagon sitting out in front of a body shop on Sunday. It looked like the drivetrain was finished and all it was waiting on was body work and paint. Taken on September 13th, 2015.

Dodge Demon

nobody@ipernity.com (HaarFager) — Sun, 24 May 2015 17:51:19 +0000

HaarFager has posted:

I hadn't seen a Dodge like this in a long time! It was at the Wayne County Misfits car show held at Fairfield, Illinois on May 23rd, 2015. Taken with a Samsung L100 point and shoot digital camera.

Dodge Ram?

nobody@ipernity.com (HaarFager) — Thu, 19 Feb 2015 07:12:34 +0000

HaarFager has posted:

I saw this rusted Dodge pickup on October 31st, 2014 and stopped in to get a picture of it.

Dodge Chargers

nobody@ipernity.com (HaarFager) — Tue, 18 Nov 2014 01:48:10 +0000

HaarFager has posted:

His and hers Dodge Chargers - a husband and wife always drive up in these two Chargers. Here they are sitting side by side at the Wayne County Misfits spring car show of 2006. To the left is a Dodge Daytona Charger and on the right is a regular Dodge Charger.

Dodge Charger

nobody@ipernity.com (HaarFager) — Tue, 18 Nov 2014 01:46:46 +0000

HaarFager has posted:

Here's a better view of the Dodge Charger, from the Wayne County Misfits spring car show of 2006.

Dodge Daytona Charger

nobody@ipernity.com (HaarFager) — Tue, 18 Nov 2014 01:45:40 +0000

HaarFager has posted:

Here's the Dodge Daytona Charger pulling in to the Wayne County Misfits spring car show of 2012.

1976 Dodge Camper

nobody@ipernity.com (HaarFager) — Wed, 01 Oct 2014 02:27:58 +0000

HaarFager has posted:

My old 1976 Dodge camper truck. I bought the truck by itself at a local city sealed-bid auction and took it home with the high bid of $109.27. The camper I added later and it cost more than the truck! I remember on the tailgate, there was a Bicentennial sticker.

1971 Dodge Polara

nobody@ipernity.com (HaarFager) — Wed, 01 Oct 2014 01:17:48 +0000

HaarFager has posted:

My 1971 Dodge Polara as it looked when I last had it. It was taken with a Minolta XD11 and Kodak Kodachrome 25 film. However, I shot the film and the roll got stuck in a drawer for 25 years before it was developed. When it was developed, it looked awful, but at least the pictures turned out somewhat.

Some of the things I had done to my wagon up to this point were:
Removed the front bench seat and replaced it with custom bucket seats.
Removed the back seat and laid the platform down. I was attempting to make it into a sedan delivery.
Shaved the rear door handles, welded the back doors shut and filled in the seams.
Had side pipes installed.
Lowered the front in about 3-4 inches.
Since it came from the factory with a spoiler on the top above the back door, I crafted a front airdam out of sheet metal and welded it on.
Installed hood pins to keep the hood down secure.
Filled in the seams for the front cap where it attached to the front fenders.
Painted the grill a flat black.
Removed most of the chrome.

It looks like it doesn't have a front driver's side wheel, but that's just because I had gotten two new tires for the front and the rims were black with no hubcaps. Just after this picture was taken, I had 60's mounted on the rear. Even though they were a little wider than stock, they still fit under the fenders without rubbing.

1971 Dodge Polara Station Wagon

nobody@ipernity.com (HaarFager) — Tue, 30 Sep 2014 22:19:26 +0000

HaarFager has posted:

This is the back of my 1971 Dodge Polara station wagon. I was doing so body work to it, so I knew it would get repainted soon and the graffiti wouldn't show.

1971 Dodge Polara Station Wagon

nobody@ipernity.com (HaarFager) — Tue, 30 Sep 2014 22:20:31 +0000

HaarFager has posted:

A shot showing the work in progress I was doing to my 1971 Dodge Polara station wagon. Taken circa 1982 with a Minolta XD11.

1971 Dodge Polara Station Wagon

nobody@ipernity.com (HaarFager) — Tue, 30 Sep 2014 22:21:30 +0000

HaarFager has posted:

Another shot of my 1971 Dodge Polara station wagon with the body work in progress. Taken circa 1982 with a Minolta XD11.

Polara

nobody@ipernity.com (HaarFager) — Thu, 15 May 2014 06:00:18 +0000

HaarFager has posted:

The name badge from my old 1971 Dodge Polara station wagon.