Photos, videos and docs of .:madworm:., with the keywords: "hackvana"

Heat-shrink tube wrapped board

nobody@ipernity.com (.:madworm:.) — Wed, 16 Jul 2014 13:37:01 +0000

Final version in black

nobody@ipernity.com (.:madworm:.) — Mon, 18 Nov 2013 23:25:01 +0000

May be found on tindie.

The device can be equipped with either standard single-colour LEDs or dual-colour ones. The demo firmware supports a couple of modes, which can be cycled through by shorting the two center-most pins and applying power. The settings are stored in EEPROM.

Pogo-Key in action

nobody@ipernity.com (.:madworm:.) — Tue, 12 Nov 2013 12:10:01 +0000

.:madworm:. has posted:

Pogo-Key

nobody@ipernity.com (.:madworm:.) — Tue, 12 Nov 2013 12:10:01 +0000

.:madworm:. has posted:

Pogo-pins closeup

nobody@ipernity.com (.:madworm:.) — Tue, 12 Nov 2013 12:09:01 +0000

.:madworm:. has posted:

Pogo-pin contact alignment

nobody@ipernity.com (.:madworm:.) — Tue, 12 Nov 2013 12:09:01 +0000

.:madworm:. has posted:

Pogo-Key

nobody@ipernity.com (.:madworm:.) — Tue, 12 Nov 2013 12:09:01 +0000

.:madworm:. has posted:

Pogo-Key

nobody@ipernity.com (.:madworm:.) — Tue, 12 Nov 2013 12:08:01 +0000

.:madworm:. has posted:

Pogo-pin tacked down

nobody@ipernity.com (.:madworm:.) — Tue, 12 Nov 2013 12:08:01 +0000

.:madworm:. has posted:

Pogo-Key parts

nobody@ipernity.com (.:madworm:.) — Tue, 12 Nov 2013 12:07:01 +0000

.:madworm:. has posted:

Another panel test

nobody@ipernity.com (.:madworm:.) — Fri, 09 Aug 2013 14:02:01 +0000

.:madworm:. has posted:

Preparing for solder paste

nobody@ipernity.com (.:madworm:.) — Thu, 18 Jul 2013 21:20:01 +0000

.:madworm:. has posted:

KiCad - panelized by hand

nobody@ipernity.com (.:madworm:.) — Thu, 21 Mar 2013 20:57:33 +0000

.:madworm:. has posted:

It's doable for small panels, but gets tedious pretty quickly. Creating a footprint for the mouse-bites helped a bit.

It would be really nice if KiCad supported "cloned" copies, so changes to the parent automatically propagate to all children.

This panel was ordered at hackvana.

Another reason to use git for version-control

nobody@ipernity.com (.:madworm:.) — Thu, 05 Sep 2013 09:01:01 +0000

.:madworm:. has posted:

Getting started with git version-control: git-scm.com/book
KICad PCB: www.kicad-pcb.org

The first real panel - turned out nicely

nobody@ipernity.com (.:madworm:.) — Thu, 05 Sep 2013 09:01:02 +0000

.:madworm:. has posted:

This time it's got it all: a frame, machine-handling and alignment holes and fiducials. Heck, I even added a unique board-identifier (git commit-id-#). I will keep at least one of them as part of my "finished projects collection".

It's green and inedible

nobody@ipernity.com (.:madworm:.) — Thu, 05 Sep 2013 09:01:01 +0000

.:madworm:. has posted:

16 LEDs on black PCB

nobody@ipernity.com (.:madworm:.) — Sun, 04 Aug 2013 16:49:01 +0000

.:madworm:. has posted:

May be found on tindie.com

Lighting up

nobody@ipernity.com (.:madworm:.) — Sun, 04 Aug 2013 16:49:02 +0000

.:madworm:. has posted:

I messed up the solder mask a bit. Not too shabby for the first prototype of the 2nd series.

May be found on tindie.com

Heap of boards

nobody@ipernity.com (.:madworm:.) — Fri, 02 Aug 2013 15:53:01 +0000

.:madworm:. has posted:

May be found on tindie.com

Tiny black circuit board

nobody@ipernity.com (.:madworm:.) — Fri, 02 Aug 2013 15:53:01 +0000

.:madworm:. has posted:

May be found on tindie.com